Abstract
This dataset reports measurement of sediment sample wet weight (g) and dry weight (g) for core sub-samples at 2mm sampling intervals for “surficial unit” and 5mm sampling resolution intervals to the base of cores. Bulk density is the dry weight per sampling volume expressed as g/cm3. Dataset also reports percent porewater. The sediment cores were collected onboard the R/V Weatherbird II cruises WB-0815 and WB-0915 in the Gulf of Mexico from 2015-08-16 to 2015-10-01. Chief Scientist for these cruises was Dr. Steve Murawski and the objective was to create Gulf-wide baselines for sediment and fish.
Purpose
Determine dry bulk density and % porewater content for sub-sampled core intervals.
Keywords
Sediment Core, Bulk Density, pore water, benthic, geological, sediment analysis, Ocean Instrument MC-800 Multicore, Shipek Grab Sampler
UDI
R4.x267.000:0107
Date
January 2019
Point of Contact
Name
Gregg R. Brooks
Organization
Eckerd College / Marine Science
Name
Rebekka Larson
Organization
University of South Florida / College of Marine Science
Funding Source
RFP-4
DOI
10.7266/n7-qzyx-sz24
Rights Information
This work is licensed under a
Creative Commons Public Domain Dedication 1.0 License.
Scholar Commons Citation
Gregg Brooks and Rebekka Larson. 2019. Bulk density/porewater data from sediment cores collected onboard R/V Weatherbird II cruises WB-0815 and WB-0915 in the Gulf of Mexico from 2015-08-16 to 2015-10-01. Distributed by: Gulf of Mexico Research Initiative Information and Data Cooperative (GRIIDC), Harte Research Institute, Texas A&M University–Corpus Christi. doi:10.7266/n7-qzyx-sz24
Comments
Supplemental Information
Latitude and longitude of core site (decimal degrees), water depth of core site (m), core collection date (mm/dd/yy), site identification (ID), core identification (id), top depth of interval (mm), bottom depth of interval (mm), average depth of interval (mm), sediment wet weight (g), sediment dry weight (g), sample volume (cm3), bulk density (g/cm3), porewater (%), laboratory/facility analysis was performed at. Bulk density was calculated using sediment dry weight (g) and sample volume (cm3). Blank cell denotes analysis not performed for the interval, no data generated. The dataset includes cruise documentation.||Ocean Instrument MC-800 Multicore, Shipek Grab.|||